1166 East Cliff Road Burnsville, MN 55337 (P) 800.524.5194 (F) 952.882.1389
 |
 |
 |
#1292-99 Spinal Rod Bender
Application: Used to adjust the degree of bend in either 1/4 inch (6.4MM) or 3/16 inch (4.8MM) LUQUE Rods or HARRINGTON Distraction Rods in spinal fusion procedures.
Spec: Material Stainless Steel
Application: Used to adjust the degree of bend in either 1/4 inch (6.4MM) or 3/16 inch (4.8MM) LUQUE Rods or HARRINGTON Distraction Rods in spinal fusion procedures.
Spec: Material Stainless Steel
Zimmer Luque Instruments
#1292-97 Luque Wire Twister
Application: Easy method of twisting surgical wire by slipping both closed ends over the hook of the LUQUE Wire Twister and tightening down on the two wires to be used at each level along the spinal column. Used with LUQUE closed beed loops (#1292-60/63) or single wire with eyelets. (#1292-80/83)
Spec: Material Stainless Steel
Application: Easy method of twisting surgical wire by slipping both closed ends over the hook of the LUQUE Wire Twister and tightening down on the two wires to be used at each level along the spinal column. Used with LUQUE closed beed loops (#1292-60/63) or single wire with eyelets. (#1292-80/83)
Spec: Material Stainless Steel
#1292-98 Bending Tube
Application: Tubular instrument for custom bending of
3/16 IN. (4.8MM) and 1/4 IN. (6.4MM) diameter LUQUE Rods.
Spec:: Material: Stainless Steel
Application: Tubular instrument for custom bending of
3/16 IN. (4.8MM) and 1/4 IN. (6.4MM) diameter LUQUE Rods.
Spec:: Material: Stainless Steel
#8503-783-784 Schlein Clamp
Application: Fine nose (783) and broad nose (784) Schlein Clamps allow access to hard to reach areas of the spine. Serrated jaws firmly grip pins & wires. Adjustable screw permits adjusting jaw tension with a tension release lever.
Spec: Material: Stainless steel
Application: Fine nose (783) and broad nose (784) Schlein Clamps allow access to hard to reach areas of the spine. Serrated jaws firmly grip pins & wires. Adjustable screw permits adjusting jaw tension with a tension release lever.
Spec: Material: Stainless steel
#1322-50 Wire Cutter
Application: A broad stub-nosed diagonal-type cutter for use on all types of wire & pins up to 1/16 IN. (1.6MM) in diameter.
Spec: Material Stainless Steel
Application: A broad stub-nosed diagonal-type cutter for use on all types of wire & pins up to 1/16 IN. (1.6MM) in diameter.
Spec: Material Stainless Steel
#4046-19 Wire Pulling Forceps
Application: Tongue-and-groove jaw facilitates grip on large-diameter wire.
Spec: Material: Stainless Steel
Application: Tongue-and-groove jaw facilitates grip on large-diameter wire.
Spec: Material: Stainless Steel
#3925-01 Pin Cutter
Application: Heavy Duty cutting instrument for use on Steinmann Pins and rods up to 1/4 IN. (6.3MM) Diameter. Length 19 IN. (48CM)
Spec: Material: Stainless Steel Jaw / Aluminum Handle
Application: Heavy Duty cutting instrument for use on Steinmann Pins and rods up to 1/4 IN. (6.3MM) Diameter. Length 19 IN. (48CM)
Spec: Material: Stainless Steel Jaw / Aluminum Handle
#3300, 3305, 3310 Stille-Luer Bone Rongeur
Application: A strong jawed ronguer for excision and precise trimming of irregular bone surfaces, such as spurs or fracture fragments. Various angled jaws assist entry of the instrument into areas which are normally innaccesible with a direct approach.
Spec: Material: Stainless Steel
Application: A strong jawed ronguer for excision and precise trimming of irregular bone surfaces, such as spurs or fracture fragments. Various angled jaws assist entry of the instrument into areas which are normally innaccesible with a direct approach.
Spec: Material: Stainless Steel
| Overall Length | ||||
| Cat. No. | Inch | CM | Cup Size | Jaw Style |
| 3300 | 8 1/4 | 21 | 9MMX15MM | Straight |
| 3305 | 8 1/2 | 22 | 9MMX15MM | Curved Lat. |
| 3310 | 9 | 23 | 6MMX15MM | 45° Angle |
#3314 Rat Tooth Ronquer Length: 8 IN. (20CM)
Application: General purpose bone shaping instrument with teeth for improved, efficient bone excision.
Spec: Material: Stainless Steel
Cup Dimensions: 8MMX10MM
Number of teeth: 5 (each) jaw
Application: General purpose bone shaping instrument with teeth for improved, efficient bone excision.
Spec: Material: Stainless Steel
Cup Dimensions: 8MMX10MM
Number of teeth: 5 (each) jaw
Zimmer is registered trademark of that corporation
 |
 |
 |
 |
 |
 |
 |
 |
 |
Proudly Made in the USA